Industrial Products



	AUTHORISED LUBRICANTS DISTRIBUTER


	Industrial

	Circulating Oil

Product	Viscosity	Specifications	Description
Cirkan K	ISO 22-460	ISO 67431/1 cat. ISO 6743/4 cat. HH.	Total loss oils (can, wick, mist) or in casing for movements, joints, bearings, chains or gears under very mild conditions.
Cirkan ZS	ISO 220, 320	ISO 6743/1 cat. AB. ISO 6743/2 cat. FD ISO 6743/6 cat. CKB.	Movements and mechanical systems under severe conditions: good anti-wear properties and resistance to oxidation.


	Compressor Oil

Product	Viscosity	Specifications	Description
Dacnis SE	ISO 100	DIN 51 506 VDL.	Di-ester based synthetic oils for air compressors (reciprocating high pressure, rotary according to specific OEM recommendation, turbo compressors). High thermal stability.
Dacnis SH	ISO 46	ISO 6743: DAJ.	PAO based synthetic oils for rotary air compressors. Long drain intervals, up to 8000 hours.
Dacnis VS	ISO 46, 150	DIN 51506 VDL, ISO DP 6521, ISO 6743: DAJ.	Mineral oils for rotary air compressors. Long drain intervals, up to 4000 hours.


	EDM Fluid

Product	Viscosity	Specifications	Description
EDM 3			Single product to perform all operations for all types of parts, from rough machining to finishing operations.


	Fire Resistant Hydraulic Oil

Product	Viscosity	Specifications	Description
Hydransafe HFC146	ISO HFC 46	ISO 6743/4 HFC.	Hydraulic circuits requiring a fire-resistant HFC-type fluid (Water/Glycol mixture). Ready-for-use fluids. Used in iron and steel industry, mines, foundries, etc.


	Gas Engine Oil

Product	Viscosity	Specifications	Description
Nateria MH	SAE 40	Caterpillar (3300 to 3500 series), Cummins, Deutz-MWM, IVECO-AIFO, Jenbacher 1000-1106, Mitsubishi, Perkins, Warsila, Waukesha.	Low ash detergent mineral oil. Suitable for spark ignited engines fed with natural gas.
Nateria MJ	SAE 40	Guascor/GMT Ficantieri. Jenbacher 1000 - 1106. Wartsila Diesel Gas. Waukesha VGF.	Medium ash mineral Gas Engine Oil.


	Grease

Product	Viscosity	Specifications	Description
Altis EM2	NLGI 2	ISO-L-XBFEA2. DIN 51502 K2R- 20.	High temperature high speed polyurea grease. For use in high speed applications operating at high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of extraction fans for hot gas or steam, bearings of dryers, pumps, and all other applications where rotation speeds and temperatures are high. Suitable for extended lubrication intervals or filled for life grease. Operating temperature range from -25°C to +180°C.
Altis SH2	NLGI 2	DIN 51502 KP2R - 40. ISO-L-XDFHB 2.	High temperature high speed synthetic polyurea grease. Extreme pressure with outstanding low and high temperature performance. Lubrication intervals or filled for life applications. Operating temperature range from -40°C to +180°C.
Caloris 2	NLGI 2	ISO-L-XAFAA2, DIN 51502 K2RO.	Bentone based grease. For the lubrication of slow moving mechanisms subjected to very high temperatures. Range of use : 0°C to 180°C and peak temperatures of 200°C.
Ceran WR2	NLGI 2	ISO-L-XBFIB 2. DIN 51502 KP2R - 25	Extreme pressure multi-purpose for lubrication of applications operating in wet conditions in marine and off-shore. Operating temperature range from -25°C to +180°C.
Specis SY	NLGI 00	ISO-L-X-CCEB 00	Semi-fluid synthetic grease for closed gears. Lubrication of enclosed mechanisms subjected to very high loads including reduction and worm gears


	Heat Transfer Oil

Product	Viscosity	Specifications	Description
Seriola 22,2100	ISO 22		Lower viscosity product, specified for use where the highest rate of heat transfer is required.
Seriola 68			Suitable for most heat transfer systems working at higher temperatures. Higher additive treatment for longer service life under the most severe operating conditions.
Seriola D			Heat transfer system flushing oil. To be used for the cleaning of heat transfer oil circuits before draining.


	Hydraulic Oil

Product	Viscosity	Specifications	Description
Azolla AF	ISO HM 46	ISO 6743/4HM. DIN 51524-2 HLP AFNOR NFE 48-603 HM. Vickers I-286S. Cincinnati P68, P69, P70, MAN N340.	High-quality ashless hydraulic oil designed for the severest industrial applications. Particularly injection moulding machines, presses, hydraulic systems in steel, wood, paper, mechanical or car industries. For use in other equipment systems equipped with fine filtration systems. Particularly in the presence of water.
Equivis XV	ISO HV 32, 46	AFNOR NFE 48603 HV DIN 51524-3 HVLP.	Hydraulic equipment having to operate over a very wide temperature range and requiring an anti-wear oil possessing an exceptional viscosity index (V1>260) and very shear resistant. Most particularly suited to applications subjected to low temperatures.


	Industrial Gear Oil

Product	Viscosity	Specifications	Description
Carter ENS/EP 700	ISO 700 at 100ºC	ISO 6743/6 cat. CKJ.	Exposed gears or in non-watertight casing revolving at low speed. For metal cables and chains. "Coating" type lubricants. Available in aerosol cans.
Carter EP	ISO 68-460	ISO 6743/6 cat. CKD. DIN 51517 Part 3. CLP AGMA 9004-D94. DAVID BROWN.	Gears in casing irrespective of the loading conditions. Bearings and highly loaded couplings. Oil mist lubrication if an extreme pressure oil is required.
Carter SH	ISO 150-1000	ISO 6743/6 cat. CKD. FLENDER - Mueller Weingarten. DIN 51517 Part 3 CLP. DAVID BROWN.	Synthetic high performance. Gears in casing under high loads and extreme temperatures. Lowering costs by increase in oil-change intervals. Miscible with mineral oils.
Carter SY	ISO 220-460	DIN 51517 Part 3 CLP ISO 6743/6 cat. CKS/CKT DAVID BROWN. CMD.	Industrial transmission with a high sliding rate. Worm gears reducers. POLYGLYCOL-base synthetic oil. Reduce wear and engine power consumption. Severe operating conditions: shocks, extreme temperatures. Incompatible with mineral oils and some synthetic oils. Protects equipment from corrosion during shutdown phases.
Carter VP/CS	ISO 220-680	ISO 6743/6 cat. CKD HANSEN transmissions FLENDER. DIN 51517 Part 3 CLP.	Reduction gears under particularly severe conditions of lubrication: extreme loads, hot, wet or cold and corrosive environment. Excellent thermal stability permits extended oil-change interval. Defers of micro-pitting. Protects equipment from corrosion during shutdown phases.


	Machine Tool Oil

Product	Viscosity	Specifications	Description
Drosera MS	ISO 32, 68, 100, 150, 220	ISO - L - HM. ISO - L - HG. ISO - L - GA. ISO - L - CKB . ISO - L - CKC. ISO - L - CKE. ISO - L - FD.	Machine tool slides and hydraulic circuits. Multi-function oil for lubrication of all machine tool parts (hydraulics, slides, gears). Perfect compatibility with cutting fluids of the TOTAL range.


	Mould Release Agent

Product	Viscosity	Specifications	Description
			Products for every application available. Please contact us for recommendations based on specific applications.


	Neat and Soluble Cutting Oils

Product	Viscosity	Specifications	Description
			A wide range of both neat and soluble machine oils are available. Please ccontact us for recommendations based on specific applications.


	Process Oil

Product	Viscosity	Specifications	Description
Torillis			A range of pure mineral oils used in a variety of industries: rubber, plastics, textiles. Available in a wide range of viscosities. Please contact us for recommendations based on specific applications.


	Refridgerator Compressor Oil

Product	Viscosity	Specifications	Description
Lunaria MP	ISO 46/68	DIN 51 503 Class KA, ISO 6743-3B-L-DRA, OEM specifications: CARRIER, COPELAND, TECUMSEH, TRANE, YORK.	Super refined naphthenic oils selected for the lubrication of rotary and reciprocating refrigerating compressors using NH3, CFC’s and HCFC’s.
Lunaria SH	ISO 46	OEM Approvals: Bock, Grasso, Howden, Sabroe,...	Semi-synthetic (PAO) oils for ammonia refrigerating compressors, with evaporator temperature down to -50°C. Product specially resistant to ammonia. Refrigerating gas: NH3.
Planet ELF ACD 68	ISO 68	OEM Approvals: AERZEN, BOCK, CARRIER, FRASCOLD, GRAM, GRASSO, HOWDEN, J&E HALL, MCQUAY, SABROE, SULZER, TECUMSEH, YORK	Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.
Planet ELF PAG 488	ISO 130	Approved by SANDEN SP20 GM Spec No: 9985752.	Synthetic PAG type lubricant for car air conditioning.


	Speciality Products

Product	Viscosity	Specifications	Description
Cortis SHT 200			High-performance synthetic fluid. Movements operating at temperatures up to 270°C on a continuous basis. Roller chains rolling elements, rollers, conveyors, cams used in ovens or stoves. Feeder machine mechanisms for glass manufacture. Machines for continuous manufacture of chipboards.
CYL C	ISO 100, 460, 680, 1000	ISO 6743/0.	Lubrication of steam engine cylinders. Compounded viscous mineral oils. Medium loaded reduction gears.
Pneuma SY		ISO 6743/11.	Anti-freeze oil for drilling air tools, specially for sound proof pneumatic tools. This oil cannot be mixed with conventional mineral oils.


	Speciality Products

Product	Viscosity	Specifications	Description
Cortis SHT 200			High-performance synthetic fluid. Movements operating at temperatures up to 270°C on a continuous basis. Roller chains rolling elements, rollers, conveyors, cams used in ovens or stoves. Feeder machine mechanisms for glass manufacture. Machines for continuous manufacture of chipboards.
CYL C	ISO 100, 460, 680, 1000	ISO 6743/0.	Lubrication of steam engine cylinders. Compounded viscous mineral oils. Medium loaded reduction gears.
Pneuma SY		ISO 6743/11.	Anti-freeze oil for drilling air tools, specially for sound proof pneumatic tools. This oil cannot be mixed with conventional mineral oils.


	Transformer Switchgear Oils

Product	Viscosity	Specifications	Description
Isovoltine	10.7	IEC 296.	Transformers, switch gears, contacts, welding sets and high voltage equipment.


	Turbine Oil

Product	Viscosity	Specifications	Description
Preslia	ISO 32, 46, 68,100	ISO 6743-5L TSA/TSE/TGA/TGB/TGE. DIN 51515 Part 1. JIS K2213 Type 2. BS 489 OEMs: ABB Switzerland, Sweden), Alstom, Demag Delaval, Fives Cail Babcock, Garrett, General Electric, GE Hydra, MAN Energy, Nuovo Pignone, Siemens, Solar, Thermondyn.	Mineral oil designated for the lubrication of turbines, (steam, gas, combined cycle). Turbo-compressors lubrication.
Preslia GT	ISO 32,46	ISO 6743-5L TSA/TSE/TGA/TGB/TGE. DIN 51515 Part 1 OEMs: ABB (Switzerland, Sweden), Alstom, General Electric, Nuovo Pignone, Siemens, Solar, Thermondyn.	Hydro-cracked lubricant with outstanding antioxidant properties for gas and combined cycle turbines.
Preslia SE Jet	ISO 25	MIL-L-23699E Approved: Allison, General Electric, Rolls-Royce, Turbomeca.	Synthetic oil for industrial gas turbines in land and marine applications.